REPELZ is a clear, breathable, low VOC sealer that provides both Hydrophobic and Oleophobic properties to a broad array of substrates including concrete, masonry, tile, brick, pavers, and porous natural stone surfaces such as: granite, marble, sandstone, flagstone, bluestone, travertine, terracotta, unglazed tile and grout, terrazzo, and many others. REPELZ not only reduces the ingress into these substrates of water and water-borne contaminants, but also effectively resists the penetration of oils and other organic based materials that cause staining and discoloration.
All surfaces to be treated must be structurally sound. The surface must be thoroughly clean, dry and free of anything that will prevent REPELZ from bonding properly. This includes, but is not limited to: curing compounds, bond breakers, release agents, coatings, sealers, stains, oils, grease, dirt, efflorescence, dust, salt residue, etc.
APPLICATIONREPELZ is designed for existing concrete and should not be used as a curing compound on freshly poured concrete. REPELZ is best applied to fully cured concrete but can be applied to “Green” concrete (15) fifteen days after pour, as long as the surface is totally dry and completely clean. STAIN RESTIANCEREPELZ is formulated to provide a reasonable amount of time for cleanup and removal of spills. Prior to that removal, REPELZ will provide a barrier to the following contaminants:Dirty Motor Oil Cola Diesel Fuel Grape Juice Brake Fluid Water Anti-Freeze BBQ Sauce Transmission Fluid Ketchup Red Wine Mayonnaise Coffee Salad Dressing Vegetable Oil Soy Sauce |
![]() Test results were obtained under laboratory conditions, using a (2) coat application of REPELZ @ 400 sq.ft./gal over bluestone and concrete core samples. Field results may vary due to type and condition of substrate and application rates. To determine the optimum results, it is recommended that different application rates be tested in the field and evaluated for build-up and stain-resistant properties. |
![]() |
![]() |
![]() |
![]() |